1 - Plug the Electrode Wire into the
Receptacle of the Electro-Pad |
 |
2 - Plug the Electrode Plug into
the Receptacle mounted in
the Main Unit exclusively
designed for the Electro-Pad |
 |
|
 |
|
3 - Plug the A.C. Adapter
into the Receptacle
mounted in the Main Unit. |
|
4 - Plug the other end of the A.C. Adapter
into the power bar. |
 |
|
 |
|
5 - Make sure the Dial of the Hand-Held
Controller is OFF. |
|
6 - Switch ON the Main Unit.
The Foot Pads will warm up gradually
as the heating elements inside them are
activated. |
 |
|
 |
|
7 - As soon as you turn on the SW-2000,
you will hear a beeping sound, and all
the lights on the Display Board will also
go on simultaneously. The SW-2000 is
warming up at this time; therefore,
except for the heating, no mode timer
or stimulation will be in effect. |
|
8 - Peel the transparent film off the Elctro-
Pad, and stick the Electro-Pad to your
shoulders or waist. |
 |
|
 |
|
|
|
|
|
|
|
Download this document
Note: This is in PDF format. You can view this document using Adobe Acrobat Reader.
 |